Odolné - ABS, ASA, CPE, PC, PA-nylon, Peek, PEI
-
Přidat k OblíbenýmPEEK 1,75 mm 200 g Natural
PEEK je semikrystalický termoplast s vynikajícími vlastnostmi. Teplota trysky: 355 - 390°C. Teplota podložky: 120°C. Při nepoužívání vlákno skladujte v sáčku, chladu, suchu a temnu.
Na objednávku
4699 Kč
-
Přidat k OblíbenýmPolymaker Nylon CoPA 6/6-6
PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.Highlights:High Heat ResistanceRobust MaterialHigh Tensile Strength
Na objednávku (10001 ks)
1409 Kč
-
Přidat k OblíbenýmBASF Ultrafuse PA6 GF30
Ultrafuse PA6 GF30 contains 30% of special glass fibers that aredesigned for filament making and 3D printing. PA6 GF30 has a reduced warping compared to neat PA6 which makes Ultrafuse PA6 GF30 with its excellent layer adhesion and its compatibility with the watersoluble Ultrafuse BVOH the right solution for industrial parts printable on any standard FFF printer.Highlights:Very high stiffness...
Na objednávku (10001 ks)
6599 Kč
-
Přidat k OblíbenýmPolymaker PolyMide PA6-CF
PolyMide™ PA6-CF is a carbon fiber reinforced PA6 (Nylon 6) filament. The carbon fiber reinforcement provides significantly improved stiffness, strength and heat resistance with outstanding layer adhesion.Highlights:Excellent thermal propertiesHigh mechanical resistanceGood layer adhesion
Na objednávku (10001 ks)
1329 Kč
-
Přidat k Oblíbeným
Polymaker PolyMide PA6-CF
PolyMide™ PA6-CF is a carbon fiber reinforced PA6 (Nylon 6) filament. The carbon fiber reinforcement provides significantly improved stiffness, strength and heat resistance with outstanding layer adhesion.Highlights:Excellent thermal propertiesHigh mechanical resistanceGood layer adhesion
Na objednávku (10001 ks)
4879 Kč
-
Přidat k Oblíbeným
Polymaker PolyMide PA6-CF
PolyMide™ PA6-CF is a carbon fiber reinforced PA6 (Nylon 6) filament. The carbon fiber reinforcement provides significantly improved stiffness, strength and heat resistance with outstanding layer adhesion.Highlights:Excellent thermal propertiesHigh mechanical resistanceGood layer adhesion
Na objednávku (10001 ks)
4879 Kč
-
Přidat k Oblíbeným
BASF Ultrafuse PA6 GF30
Ultrafuse PA6 GF30 contains 30% of special glass fibers that aredesigned for filament making and 3D printing. PA6 GF30 has a reduced warping compared to neat PA6 which makes Ultrafuse PA6 GF30 with its excellent layer adhesion and its compatibility with the watersoluble Ultrafuse BVOH the right solution for industrial parts printable on any standard FFF printer.Highlights:Very high stiffness...
Na objednávku (10001 ks)
2539 Kč
-
Přidat k Oblíbeným
Polymaker Nylon CoPA 6/6-6
PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.Highlights:High Heat ResistanceRobust MaterialHigh Tensile Strength
Na objednávku (10001 ks)
1409 Kč
-
Přidat k Oblíbeným3DXTech ThermaX™ PEEK
ThermaX PEEK (PolyEtherEtherKetone) is one of the highest-performance polymers in world. PEEK has exceptional mechanical, thermal, and chemical resistance properties making it a go-to material in some of the most demanding applications.
Na objednávku (10001 ks)
8169 Kč
-
Přidat k Oblíbeným3DXTech Obsidian-GF™ PA6+GF
Obsidian-GF is a Glass Fiber reinforced PA6 that was formulated to print using stock Onyx settings. This is an excellent drop-in replacement for Markforged Onyx that offers many much-awaited colors in an engineering-grade material.
Na objednávku (10001 ks)
3249 Kč
-
Přidat k Oblíbeným3DXTech FibreX PPA+GF15
FibreX PPA+GF15 is a high-performance nylon with excellent thermal, mechanical, and chemical resistance properties. Our specialty PPA (polyphthalamide) is a semi-aromatic nylon that is superior to typical aliphatic nylons such as PA6 and PA12 and used extensively in demanding industries such as auto, aerospace, oil & gas, and electronics.
Na objednávku (10001 ks)
3529 Kč
-
Přidat k OblíbenýmRaise3D Hyper Core PPA GF25 Filament
During high-speed FFF printing, the thick polymer skin of Hyper Core PPA GF25 filament improves polymer healing and welding process across the interface of adjacent layers and lines. The Hyper Core PPA GF25 is optimized for a fast melt rate in the hot end as well as a good balance of print efficiency, quality, performance and cost.HighlightsDeveloped for Hyper FFFTailored fiber distributionHigh...
Na objednávku (10001 ks)
8549 Kč
-
Přidat k Oblíbeným3DXTech ThermaX™ PEKK
ThermaX PEKK-A (PolyEtherKetoneKetone) is made using Arkema Kepstan® PEKK 60/40 copolymer and is one of the highest performance materials in the world while also being one of the easiest to print ultra-polymers.
Na objednávku (10001 ks)
12499 Kč
-
Přidat k OblíbenýmPEI 1,75 mm 750 g Natural
Polyether (PEI) Ultem je amorfní, jantarový a transparentní termoplast. Teplota trysky: 340 - 360°C. Teplota podložky: 120°C. Při nepoužívání vlákno skladujte v sáčku, chladu, suchu a temnu.
Na objednávku (9999 ks)
5499 Kč
-
Přidat k OblíbenýmBASF Ultrafuse PA
Ultrafuse PA is specially developed for 3D printing and it is based on BASF´s polyamide portfolio known as Ultramid.The filament has unique mechanical properties due to its chemical structure. This makes it suitable for a wide range of applications working within a larger temperature range.Highlights:Good fatigue resistanceLow melting point makes it printable for many FFF printersGood wear...
Na objednávku (10001 ks)
1449 Kč