【Pet-G】 high gloss, great light throughput (for some shades). High toughness and high shock resistance. Chemical resistance, good stability, without cracking.
【Stable dimensional tolerance】 minimum tolerance and small shrinkage - ensure consistent administration and stable prints, no clogging, extremely high print success, resulting in printed components that have excellent finish and are very accurate . (depending on the printer)
It melts, does not crack, does not contain bubbles. Print smoothly and repeatedly without blocking a nozzle or extruder.
【Environmental-friendly material】 silk PLA supplies a smooth and glossy effect to the basic PLA. ESUN fibers are made of original materials (not recycled), biodegradable and ecological, non -toxic and odorless, no possibility of harm to the user or the environment. Ideal for safe printing.
【Vacuum enclosed packaging】 Clean mass weight: 1 kg. ESUN FILAMENT Delivered in a drift-picked bag that keeps it dry and out of dust and foreign particles, prevents nozzles from clogging and providing smooth 3D models.
- string diameter: 1.75 ± 0.03 mm
- Design length: 350-355 m
- coil size: diameter 200 mm - width 64 mm - center hole 57 mm
- Pack size: 216 x 202 x 76 mm
- Weight Package: 1,48 kg
- nozzle temperature: 230-250 ℃
- pad temperature: 25-80 ℃
- density: 1.23 g / cm3
- Melt Flow Index: 20 (250 ° C / 2.16kg) g / 10min
- tensile strength: 49 MPa
- Extension at a quarry point: 225%
- bend strength: 68 MPa
- Fault strength module: 1800 MPa
- notch toughness: 7.6 kj / ㎡
- deformation temperature: 64 (° C, 0.45MPA)
- Manufacturer: Esun
Doplňující informace
| Kategorie: | Výprodej |
| Barva: | transparentní, zelená |
| Váha materiálu: | 1 kg |
| Průměr: | 2,85 mm - 3 mm |
| Přesnost struny: | ± 0,05 mm |
| Teplota podložky: | 25 - 70°C |
| Teplota trysky: | 230-250°C |
