PolyMax
PolyMax™ is a family of advanced 3D printing filaments produced with Polymaker’s Nano-reinforcement technology, to deliver exceptional mechanical properties and printing quality.
Tough PC
PolyMax™ PC is an engineered PC filament combining excellent strength, toughness, heat resistance and printing quality. It is the ideal choice for a wide range of engineering applications.
Recommended Settings
- Nozzle Temperature: 250˚C – 270˚C
- Printing Speed: 30mm/s – 50mm/s
- Bed Temperature: 90˚C – 105˚C
- Bed Surface: MAGIGOO PC BUILDTAK
- Cooling Fan: OFF
Note When printing with PolyMax™ PC it is recommended to use an enclosure. For large part it is recommended to use a heated chamber. It is recommended to anneal the printed part right after the printing process to release the residual internal stress.Annealing settings: 90˚C for 6h
Basic Data Printing Parameter
| Filament Typ | PC |
| Diameter | 1,75 mm |
| Weight | 3,00 kg |
| Lenght | 1048 m |
| Color | Black |
| Recomended Printing Temp Min | 250 ºC |
| Recomended Printing Temp Max | 270 ºC |
| Recomended Printbed Temperature Min | 90 ºC |
| Recomended Printbed Temperature Max | 105 ºC |
| Recomended Printing Speed Min | 30 mm/s |
| Recommended Printing Speed Max | 50 mm/s |
| Recomended Fan Speed Min | 0 % |
| Recomended Fan Speed Max | 0 % |
| Recomended Retraction Min | 1 mm |
| General | |
| Specific gravity | 1,19 g/cm3 ISO 1183 |
| Temperature | |
| Vicat softening temp | 117 °C ISO 306 |
| Heat deflection temp | 99,3 °C ISO 75 |
| Tensile | |
| Tensile strength | 59,7 MPa ISO 527 |
| Tensile modulus | 2048 MPa ISO 527 |
| Flexural | |
| Flexural Strenght | 94,1 MPa ISO 178 |
| Flexural Modulus | 2044 MPa ISO 178 |
| Other | |
| Impact Strength | 25,1 KJ/m2 ISO 179 |
Polymaker PolyMax Tough PC
3979 Kč
3288,43 Kč bez DPH