PCL 100 2,85 mm 750 g Natural

PCL 100 2,85 mm 750 g Natural

Nastavení tiskárnyTeplota trysky: 115 - 145°C Teplota podložky: 30 - 45°C Při nepouívání vlákno schladujte v sáčku, chladnu, suchu a temnu

2999 Kč s DPH

Dostupnost: Skladem ve 2.skladu - dodání většinou do týdne

Výrobce: ElogioAM

 Facilan™  PCL 100 Polycaprolactone 750 gramů

  • Facilan™  PCL 100 it is perfect for high-value applications such as medical research.
  • Our customers use our PCL for research into artificial trachea, smart materials, scaffolds for tissue engineering, bioabsorbable implants, drug-loaded implants and other cutting-edge applications.
  • Facilan™ PCL 100 is used by many leading universities and research centers worldwide for bleeding edge work in bioprinting and patient specific medical research.
  • Facilan™ PCL 100 is very flexible and tough with a glass transition temperature of -60 °C and a print temperature of around 120°C.
  • Facilan™ PCL100 is polycaprolactone homopolymer with a molecular weight of 50000 g/mol.
  • Facilan™ PCL100 is a semi-crystalline aliphatic biodegradable polyester with white final appearance.
  • Filament produced by ElogioAM is based on raw material produced in compliance with the European regulations EC No. 1935/2004 and EC No. 10/2011 concerning plastic materials and articles coming into contact with food.
  • The material has an amazing adhesion between layers which results in great improvement of the impact resistance, strength, durability, and printability.
  • Due to the low melting point, of Facilan™ PCL100 it can be reshaped after 3D printing in water with a temperature of 55 °C.

Recommended restrictions
Do not use in medical applications involving permanent implantation in the human body.

Elogio AM Polycaprolactone Facilan™ PCL 100 is one of the most extensively used bioprinting and medical 3D printing research materials worldwide.

Sold on a 750-gram spool in both 1.75mm and 2.85mm diameter. 

 Facilan™ PCL100 Material Properties 
  • Density: 1.1 g/cm³
  • Tensile Strength: 45 MPa
  • Elongation at Yield: 15 %
  • Tensile Modulus: 350 MPa
  • IZOD Impact Strength (notched): 8 kJ/m2
  • Shore D Hardness: 46
  • Heat Deflection Temperature (0,45 MPa): 57 °C

Print Settings 

  • Bed Temperature: 30-45°C
  • Adhesion: PEI sheets
  • Print Temperature: 130 to 170°C
  • Print Speed: 20-40 mm/s
  • Notes: This material will flow readily from your nozzle, for best results use extra cooling on your model and bed.


Tato stránka používá cookies. Vice info