FIBER3D PLA Twinkling Filament 1.75 mm 1kg

Quality FIBER3D printing material guaranteeing trouble-free printing.

The glittering filament for use in 3D printers is very strong and does not exclude chemical odor when printing. PLA is biodegradable and helps to print large parts more easily.

Material description : PLA, Polylactic acid  is bioplastic made of corn starch with the same properties as plastic made of oil. This plastic is much more gentle on nature than ABS. Tetrahydrofuran soluble, possible long-term exposure to acetone can cause the surface etching. PLA is not healthy and is degradable in nature-controlled composting. Compared to ABS, the material strength is higher, the material is better printable, the only disadvantage is the lower temperature resistance. PLA can be actively cooled during printing, it does not need a heated pad. The PLA processing temperature is 190 - 220 ° C.

Plastal treatment: The material cannot be easily sanded, grinding (friction) produces heat that causes "pulling" fibers from prints. Therefore, it is advisable to cool the printout for manual grinding.

Storage: We recommend securing a dry environment. In poor storage in a humid environment, it absorbs moisture, which manifests itself as bubbles on the surface. Protect from heat.

• Simple Settings for printing
• Small shrinking when cooling - no heated pad or chamber
• good print quality even when printing at high speed
• soluble in sodium hydroxide
• Biologically degradable material

Weight incl. Packaging: 1,36 kg; Outer coil diameter: 200 mm; Center hole diameter: 75 mm; Coil width: 64 mm.

Empty coil weight approx: thinner 130 g, coarser 144 g, transparent 132 g

weight flow: 7 - 9 g / 10 min (190 ° C)

Available in colors: Twinkling Black, Twinkling Blue and Twinkling Pink

Material is supplied in cardboard box , or without a box , vacuumly packed together with silica gel that absorbs moisture.