Quality Fiber3D printing material
Is the new Pla Strun series that have a beautifully silky glossy surface . Pla Silk Filament for use in 3D printers is very strong and does not exclude chemical odor when printing. Like classic PLA, it is biodegradable (made of renewable natural resources). Pla material helps to print large parts more easily.
Material description: PLA, Polylactic acid, Polymonic acid is a bioplast made of corn starch. This material has similar properties to the materials that were made of oil. Pla Silk is much more gentle on nature than ABS. It can be dissolved using tetrahydrofurene. Long-term exposed acetone may etch the surface. Filament PLA is harmless and is also degradable in nature-controlled composting. Compared to ABS, the material strength is higher, the material is better printable. The only drawback of this material is lower temperature resistance. PLA can be actively cooled during printing, it does not need a heated pad. The Pla Silk processing temperature is 190 - 210 ° C.
PLA: The material cannot be easily sanded or drilled into holes. This is due to the fact that grinding (third) or drilling produces heat that causes "pulling" fibers from the print. It is therefore advisable to cool the printout (grind and drill underwater, or it is advisable to spray first with a filler used in modeling, and then grind and spray again, so that the model is perfectly smooth for us and finally spray it).
Storage: We recommend securing a dry environment. In poor storage in a humid environment, it absorbs moisture, which manifests itself as bubbles on the surface. Protect from heat.
Main advantages of PLA:
- small shrinking when cooling-not a heated pad or chamber
- good print quality even when printing at high speed
- soluble in sodium hydroxide
- biodegradable material
Weight incl. Packaging: 1,36 kg; Outer coil diameter: 200 mm; Center hole diameter: 75 mm; Coil width: 64 mm.
Empty coil weight approx: thinner 130 g, coarser 144 g, transparent 132 g
Weight flow: 9 - 11 g/10 min (190 ° C)
Material is supplied in > a cardboard box or without a box, vacuum wrapped together with silica gel that absorbs moisture.
Supplied in 15 shades.
Doplňující informace
| Kategorie: | Silk |
| Barva: | fialová, oranžová, žlutá, zelená, modrá, červená, bílá, bronzová, černá, šedá, měděná, růžová, zlatá, stříbrná, vysoký lesk, mosaz, duhová |
| Váha materiálu: | 1 kg |
| Průměr: | 1,75 mm |
| Přesnost struny: | ± 0,02 mm |
| Teplota podložky: | 0 - 60° C |
| Teplota trysky: | 190 - 250° C |
349 Kč
288,43 Kč bez DPH
