Smartfil Smart Stick product for better grip 100ml

Smart Stick Liquid adhesive (100 ml) is specially developed for printing polypropylene. Since polypropylene is very poorly associated with most existing materials due to its chemical composition, it does not hold the prints well on the printing mat. Smart Stick acts as an interifase between material and base, thus ensuring the necessary adhesion. p>

You do not have to use Smart Stick only for PP, it is a universal preparation. It is compatible with most existing materials on the market. It can be used for ABS, hips, PLA, PET, PP, PA and more.

will last more than 100 uses. It is soluble in water and is therefore easy to clean.

1. Removing the sealing foil
Before use, it is necessary to remove the wheel from the seal that prevents drying and spilling during transport. Unscrew the applicator cover and remove the sealing foil.
2. Apply the product
to the print pad a continuous thin film to ensure the adhesion of the print to the mat. Once the product is applied, it is recommended to re -close the bottle so that the inner liquid does not dry, causing clogging of the applicator.
3. Printing the model
Smart Stick is a product that works with printers with heated and unheated printing pad. In the case of a heated pad, the ideal temperature is around 70-90 ° C. For prints where a really high adhesion rate is required, it is recommended to increase the print temperature to 90-100 ° C for the first layer to achieve a large adhesive adhesive. For other layers, it is possible to reduce the temperature to 70 ° C to increase the structural capacity of the adhesive.
4. Removing the model from the pad
Once the piece is printed, the connection between the materials is very strong, so we recommend washing water to dilute the product and reduce the grip. Then peel off the print in the usual way, for example, using a spatula.
5. Cleaning the pad
You can often leave a layer from the previous print for further use and achieve the same good results. However, once the layer is broken, it should be restored. In this case, wash the pad surface with hot water to weaken the adhesive layer and then remove it with a spatula. We recommend using the product on a glass or removable pad, making the cleaning process easier.