Vacuum 120 W 260 mm Welding bar

Is closed, the air suction starts.

• After a short hold of the lid, the lid is sealed by the pressure and the process is further automated.
• After completion of the exhaust (according to the set time sequence) begins welding the bags (again the time interval must be set).
• After welding is followed by the process of cooling the sealed joint that is important for sufficient curing of the weld.
• After curing, the air is filled back into the chamber. At this stage there will be a visible shrinkage of bags under the influence of the differences in the ambient pressure and the bag itself.
• After the air is filled, the chamber lid opens itself.

Properties:

• Model: 260s
• Power: 120 W
• Compressor power: 5.5 l/min
• Welding bar length: 260 mm
• Weld thickness: 10 mm
• Material: stainless steel
• Current: 5 and
• Shower speed: 2 cfm
• Air supply hole: 6 mm
• Noise: & lt; 80db
• Lowest absolute pressure: ≤ 1 kpa
• Package speed: 1-4 pcs/min
• Chamber Dimensions: 330 x 275 x 50 mm
• Device dimensions: 405 x 320 x 340 mm

If the product is in the "order" state, it takes about 2 weeks of delivery. The product can only be ordered with personal collection, sending only by individual agreement.

Warning:

Vacuum bags are not included.