Monocure 3D RESINAWAY Cleaner
Monocure 3D RESINAWAY is a non-flammable, safe, highly advanced UV resin cleaning solution. It is chemically engineered to quickly & effectively remove uncured UV photopolymer resin from printed parts without unwanted surface cracks, cloudiness or white residue. It is a perfect cleaner for build plates, vats, instruments & surfaces. It is safer, quicker, more effective and longer lasting than Isopropyl Alcohol (IPA).
Shake well before each use. Slowly drip the pigment solution into Monocure 3D resin and mix well until desired colour is reached. To obtain the same colour density of our pigmented Rapid Resin, you will need to add approximately 4ml of the pigment dispersion. Adding too much pigment can result in slower curing times and potentially inhibit the cure completely.
The pigment solution can be added to our white resin or clear depending on the finish you are after. When adding to the white base resin an opaque finish will result. If you add to the clear resin a transparent look will result. The more pigment you add, the more solid the colour will become.
Please be extremely cautious when handling the pigments as they will stain very easily.
Pigment dispersions are safe to use, but it is always recommended to read and understand the safety and technical information before use
Use this cleaning agent as is, do not dilute with water.
For best results, start with a “pre-wash” of RESINAWAY® in a separate container to remove excess resin using a soft brush to assist. Then place the object into an ultrasonic cleaning bath. Keep printed objects submerged in RESINAWAY® until the uncured resin has been removed.
Once clear of resin, remove the object from bath, use compressed air to remove excess liquid, otherwise pat dry with a lint-free cloth. Then post-cure the part using a recommended LED 405nm light until the surface is tack free (approx. 5 mins at 30 watts). The final process is to rinse under running tap water.
For cleaning vats, build plates, instruments & surfaces, rinse/soak/wipe with RESINAWAY® then wash with fresh water.
Monocure 3D RESINAWAY is a non-flammable, safe, highly advanced UV resin cleaning solution. It is chemically engineered to quickly & effectively remove uncured UV photopolymer resin from printed parts without unwanted surface cracks, cloudiness or white residue. It is a perfect cleaner for build plates, vats, instruments & surfaces. It is safer, quicker, more effective and longer lasting than Isopropyl Alcohol (IPA).
Features