Vyhledávání
-
Přidat k Oblíbeným
Micro Swiss Direct Drive Extruder with hotend for ExoSlide System
Upgrade your extruder to a Microswiss direct drive extruder.FeaturesNo modification required, simple plug and playNo printed brackets or sandwiches
Na objednávku (10001 ks)
3049 Kč
-
Přidat k Oblíbeným
E3D RapidChange Revo™ Micro - 1.75mm, 12V Fully Loaded Kit
Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink we’ve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct drive setups, Revo Micro is fully compatible with our Revo ecosystem, so you can easily change nozzles without tools or hot tightening at room...
Na objednávku (10001 ks)
4139 Kč
-
Přidat k Oblíbeným
Micro Swiss 0.5 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle.Fits onlyit will ONLY fit our New MK10 All Metal Hotend
Na objednávku (10001 ks)
339 Kč
-
Přidat k Oblíbeným
E3D RapidChange Revo™ Voron - 1.75mm, 12V Fully Loaded Nozzle Kit
Smaller, lighter, REDDER. Say hello to the Revo Voron – the HotEnd of choice for Voron 3D printers. We’ve developed this Revo-compatible cold side in collaboration with Team Voron. Boost your Voron 3D printer with RapidChange capabilities so you can change nozzles without tools or hot tightening!
Na objednávku (10001 ks)
3939 Kč
-
Přidat k Oblíbeným
Micro Swiss 0.8 mm Nozzle for MK10 Allmetal Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle.Fits onlyit will ONLY fit our New MK10 All Metal Hotend
Na objednávku (10001 ks)
339 Kč
-
Přidat k Oblíbeným
Micro Swiss M2 Hardened High Speed Steel Nozzle - MK8 - 0.60mm
The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel, hardened and tempered to 68 HRC, plated with Electroless Nickel Plating, and coated with WS2 coating.FeaturesUp to 450C without losing the hardness
Na objednávku (10001 ks)
589 Kč
-
Přidat k Oblíbeným
Micro Swiss M2 Hardened High Speed Steel Nozzle RepRap - M6 Thread 1.75mm Filament - 0.80mm
The M2 nozzles are designed for high temperatures, abrasion resistance and with superior non-stick properties. Nozzles are machined from M2 high speed steel, hardened and tempered to 68 HRC, plated with Electroless Nickel Plating, and coated with WS2 coating.FitsAll printers with a E3D V4 / V5 / V6 1.75 Hotend
Na objednávku (10001 ks)
509 Kč
-
Přidat k Oblíbeným
Micro Swiss Plated Wear Resistant Nozzle MK10 Nozzle 0.6mm
This is MK10 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating.FeaturesFor PTFE lined hotends only
Na objednávku (10001 ks)
409 Kč
-
Přidat k Oblíbeným
Micro Swiss Plated Wear Resistant High Flow Volcano Compatible / Artillery Sidewinder 1.75mm Nozzle - 1,0 mm
This is Plated Wear Resistant Nozzle for Artillery Sidewinder/Volcano.FeaturesM6x.75mm threadsTwinClad XT coating360 brass base materialVery hard and abrasion resistant
Na objednávku (10001 ks)
409 Kč
-
Přidat k Oblíbeným
Micro Swiss Plated Wear Resistant nozzle for Wanhao i3 Mini / MP Select Mini / Mini Delta / ProFab Mini / Malyan M200 / PrimaCreator P120 - 0.20mm
This nozzle is made from a 360 brass base material and plated with TwinClad XT coating.FitsPrimaCreator P120Wanhao i3 MiniMP Select MiniMini DeltaProFab MiniMalyan M200
Na objednávku (10001 ks)
279 Kč
-
Přidat k Oblíbeným
Micro Swiss Nozzle for Ultimaker2+ 0.3mm
This is RepRap style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating.FitsOlson BlockUltimaker 2+
Na objednávku (10001 ks)
409 Kč
-
Přidat k Oblíbeným
Na objednávku (10001 ks)
1929 Kč
-
Přidat k Oblíbeným
Copymaster3D Water Washable UV Resin - 1000 ml - Light Grey
Water Washable UV Resin from Copymaster3D enables you to print high quality models with little mess and easy clean up. This resin is compatible with all popular 3D Printer brands using a light wavelength between 395nm and 405nm.FeaturesPerfect for reproducing fine details and surface finishesLow odour compared to other resinsCleanable in tap water, no need for IPA or ChemicalsFast curing time...
Na objednávku (10001 ks)
749 Kč
-
Přidat k Oblíbeným
Na objednávku (10001 ks)
1929 Kč
-
Přidat k Oblíbeným
CreatBot 2,85 mm Hardened Nozzle 0,2 mm - 1 pcs
The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.FeaturesHigh-quality nozzleState of the art factoryTolerance is less than ± 0.01 mm
Na objednávku (10001 ks)
749 Kč