Vyhledávání
-
Přidat k OblíbenýmMicro Swiss Brass Plated Wear Resistant Nozzle for Flashforge Creator Pro 3
This is Brass Plated Wear Resistant Nozzle for Flashforge Creator Pro 3. The Nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If...
Na objednávku (10001 ks)
409 Kč
-
Přidat k Oblíbeným
Micro Swiss Brass Plated Wear Resistant Nozzle for Flashforge Creator Pro 3
This is Brass Plated Wear Resistant Nozzle for Flashforge Creator Pro 3. The Nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If...
Na objednávku (10001 ks)
409 Kč
-
Přidat k OblíbenýmxTool Care for F1
xTool Care is an extended service launched by xTool for you with an xTool F1.The warranty events cover nearly 90% of machine failure and damage. No matter if it is a hardware or software problem, xToolCare guarantees to keep you at ease with a professional and quick help.Highlights2-way free shipping gets your faulty machine repaired hassle-free12h quick response to all your software and...
Na objednávku (10001 ks)
6339 Kč
-
Přidat k OblíbenýmSlice Engineering Mosquito Hotend Mounting Kit
Set of screws, washers and zip-tie to mount Mosquito™ and Mosquito Magnum™ hotends from Slice Engineering.
Na objednávku (10001 ks)
139 Kč
-
Přidat k OblíbenýmE3D Revo High Flow HotSide Single Nozzle Kit - 1.75mm - 24V - 60W
High-flow 3D printing is just a 30-second nozzle change away! Achieve high flow results in the same form factor as a standard E3D Revo ™ thanks to optimised internal nozzle geometry. The Revo High Flow HotSide bundle allows maximum volumetric flow performance from your Revo HotEnd.Highlights:Maximum temperature: 300°CFilament diameter: 1.75mmVoltage: 24VPower: 60WCompatible with: Revo Brass...
Na objednávku (10001 ks)
1839 Kč
-
Přidat k OblíbenýmCreality Extrusion Kit
Extrusion Kit for Ender-5 S1, Sermoon V2, CR-200B Pro, Ender-3 S1, Sermoon V1, Sermoon V1 Pro, Sermoon D3, Ender-3 V3 SE & Ender-3 V3 KE
Na objednávku (10001 ks)
319 Kč
-
Přidat k OblíbenýmxTool P2 55W - CO2 Desktop Laser Cutter
After nearly 2 years of development, xTool P2 comes out with many new features that showcase an impressive level of innovation and intelligence, bringing users a cutting-edge experience. With its high speed, high power, and big bed size, xTool welcomes you to the world-class CO2 laser revolution!Highlights:600 mm/s Maximum Engraving Speed55 W Laser PowerBuilt-in Air AssistDual 16mp Cameras680 x...
Na objednávku (10001 ks)
132249 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo Nozzle Assembly High Flow 0.4mm - 3-Pack
High-flow 3D printing is just a 30-second nozzle change away! Achieve high-flow results in the same form factor as a standard E3D Revo™ thanks to optimised internal nozzle geometry. High Flow Nozzles can be used with your existing 40W HeaterCores to maximise your flow rate with standard printing materials.Highlights:Maximum temperature: 300°CFilament diameter: 1.75mmVoltage: 24VCompatible with:...
Na objednávku (10001 ks)
2889 Kč
-
Přidat k OblíbenýmE3D Revo Roto Sensored
Roto is the extruder that Revo deserves. It carefully balances weight (146g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.Key featuresWeight 146gExtrusion force 70N+Filament diameter 1.75mmMotor current 0.14 A + 10% MaxGear ratio 11.2621Operational temp rating 40°C
Na objednávku (10001 ks)
6319 Kč
-
Přidat k OblíbenýmSlice Engineering RepRap M6 GammaMaster Nozzle
Introducing the GammaMaster® Nozzle – the newest nozzle technology by Slice Engineering, incorporating cutting-edge developments in metallurgy and surface preparation. Gone are the days of compromising thermal performance while printing with abrasive filaments, as GammaMaster offers the ultimate solution. Engineered specifically for abrasive filament printing, this RepRap nozzle boasts...
Na objednávku (10001 ks)
779 Kč
-
Přidat k OblíbenýmSnapmaker Paired Hot Ends for J1
This is a set of 2 reserve Hotends for Snapmaker J1. The set can be used with a variety of materials: they are intended for different materials: ABS, ASA, TPU, Breakaway PLA, PVA and HIPS.Highlights:Can be used on a wide range of materialsCovered with siliconeHigh quality
Na objednávku (10001 ks)
3099 Kč
-
Přidat k Oblíbeným
Slice Engineering RepRap M6 GammaMaster Nozzle
Introducing the GammaMaster® Nozzle – the newest nozzle technology by Slice Engineering, incorporating cutting-edge developments in metallurgy and surface preparation. Gone are the days of compromising thermal performance while printing with abrasive filaments, as GammaMaster offers the ultimate solution. Engineered specifically for abrasive filament printing, this RepRap nozzle boasts...
Na objednávku (10001 ks)
779 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo Nozzle Assembly High Flow Boxed 0.6mm
High-flow 3D printing is just a 30-second nozzle change away! Achieve high-flow results in the same form factor as a standard E3D Revo™ thanks to optimised internal nozzle geometry. High Flow Nozzles can be used with your existing 40W HeaterCores to maximise your flow rate with standard printing materials.Highlights:Maximum temperature: 300°CFilament diameter: 1.75mmVoltage: 24VCompatible with:...
Na objednávku (10001 ks)
1169 Kč
-
Přidat k Oblíbeným
Creality CR-TPU - 1,75mm - 1kg
One of the standout features of Creality CR-TPU filament is its flexibility. TPU is a highly elastic material, which allows for the production of flexible and rubber-like prints. This makes it ideal for creating shock-absorbing components, gaskets, seals, and other applications where durability and flexibility are crucial.HighlightsHigh ResilienceSoft Adhesive MaterialEnvironmental Protection
Na objednávku (10001 ks)
629 Kč
-
Přidat k OblíbenýmE3D RapidChange Revo Nozzle Assembly High Flow Boxed 0.4mm
High-flow 3D printing is just a 30-second nozzle change away! Achieve high-flow results in the same form factor as a standard E3D Revo™ thanks to optimised internal nozzle geometry. High Flow Nozzles can be used with your existing 40W HeaterCores to maximise your flow rate with standard printing materials.Highlights:Maximum temperature: 300°CFilament diameter: 1.75mmVoltage: 24VCompatible with:...
Na objednávku (10001 ks)
1169 Kč