<!-- Banner -->
Bambu Support for ABS
Enhance your ABS printing experience with our innovative support material. Designed for effortless printing and hassle-free removal, this material ensures a flawless support interface every time. Fully compatible with the AMS systems, it streamlines your ABS printing process from start to finish. Say goodbye to tedious support removal and enjoy a smoother, more efficient workflow!
<!-- PC端图片 --> 
<!-- Key Feature 1 -->
Easy Support Removal
Specially formulated for ABS, our support material adheres precisely to the ABS surface, allowing for easy support removal. This streamlines your post-processing work, ensuring a more efficient workflow.
<!-- 视频开始 -->
<!-- PC视频 -->
<!-- 视频结束 --><!-- Key Feature 2 -->
Superior Support Interface Quality
Support for ABS enables a 0 Top Z distance and 0 Top interface spacing when printing, ensuring a scar free support surface. This enhances the sharpness of details, improving the overall appearance and integrity of your final prints.
<!-- PC端图片 --> 
<!-- PC端图片 --> 
<!-- PC端图片 --> RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
<!-- PC端图片 --> <!-- RFID结束 --><!-- 参数对照开始 -->
Parameters Comparison
Learn more different filaments comparison on Bambu Filament Guide >>
<!-- 表头 --> <!-- 表头 --><!-- 第二行 -->| Support for PLA/PETG | Support for PLA | Support for ABS | Support for PA/PET | PVA | |
| Color | Nature | White & Black | White | Green | Clear |
| Nozzle Type | All Size / Material | All Size / Material | 0.4 / 0.6 / 0.8 mm | 0.4 / 0.6 / 0.8 mm Hardened Steel | All Size / Material |
| Nozzle Temperature | 190 - 220 °C | 220 - 230 °C | 240 - 270 °C | 280 - 300 °C | 220 - 250 °C |
| Bed Temperature | 35 - 60 °C | 35 - 45 °C | 80 - 100 °C | 80 - 100 °C | 35 - 45 °C |
| Printing Speed | < 100 mm/s | < 200 mm/s | < 100 mm/s | < 100 mm/s | < 200 mm/s |
| Solubility | Water-insoluble | Water-insoluble | Water-insoluble, limonene-dissolvable | Water-insoluble | Water-dissolvable |
| Dry before Use | Optional | Optional | Optional | Required | Required |
| Dry Protection during Use | Optional | Optional | Optional | Required | Required |
| Filament Compatibility | PLA, PETG | PLA | ABS | PAHT-CF,PA6-CF,PA6-GF, PET-CF | PLA, PETG |
Accessory Compatibility
| Recommended | Not Recommended | |
| Build Plate | Smooth PEI Plate,Textured PEI Plate | / |
| Hotend | 0.4 / 0.6 / 0.8 mm | 0.2 mm |
| Bambu Liquid Glue / Glue Stick | Bambu Liquid Glue / Glue Stick | / |
<!-- Recommended Printing Settings开始 -->
| Recommended Printing Settings | |
| Drying Settings (Blast Drying Oven) | 80 °C, 4 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 240 - 270 °C |
| Bed Temperature (with Glue) | 80 - 100 °C |
| Printing Speed | < 100 mm/s |
| Physical Properties | |
| Density | 1.16 g/cm³ |
| Vicat Softening Temperature | N / A |
| Heat Deflection Temperature | N / A |
| Melting Temperature | 195 °C |
| Melt Index | 11.6 ± 0.7 g/10 min |
| Mechanical Properties | |
| Tensile Strength | N / A |
| Breaking Elongation Rate | N / A |
| Bending Modulus | N / A |
| Bending Strength | N / A |
| Impact Strength | N / A |
Printing Tips
• Support for ABS is soluble in limonene. Please pay attention to the usage norms and safety.
<!-- PC端图片 --> 
<!-- PC端图片 --> • Pungent and unpleasant odors may be released during printing. Make sure your printer is enclosed and placed in a well-ventilated area.
• When layer strength is required, it is recommended to increase the flushing volume to above 800 mm³. If the flushing is not thorough, it may reduce the layer adhesion of the model at surfaces that are on the same horizontal plane as the support surface.
• By increasing the "initial layer speed", a more peelable support can be obtained. However, this will increase the risk of warping.
• Dry out before use for higher print quality. Drying conditions: 80℃ for 4 hrs in the blast drying oven; 85 - 95 ℃ for 6 hrs in the X1 Series Heatbed. Please refer to Filament drying instructions on WIKI.
• For more support-related settings, please refer to Support on WIKI.
What's in the Box
<!-- 不同分辨率分栏数量 pct_grad-分栏数量-设备 --> <!-- 替换下一行 -->
<!-- PC端图片 --> Filament with Spool*1 & Desiccant*1
<!-- PC端图片 --> Package*1
Více z kategorie
449 Kč
371,07 Kč bez DPH
