Náhradní díly
Náhradní díly
-
Přidat k OblíbenýmSlice Engineering Mosquito Magnum hotend
Revised Features New heat break with reinforced throat and revised radiator to prevent damage during installation and repairs New heat sink with wider opening for the filament path to more readily accept multi-material setups like the Prusa MMU or Mosaic Palette. Main Benefits The Mosquito Magnum prints up to 20% faster than any other hotend on the market A thermal insulator protects the...
Na objednávku (10001 ks)
6209 Kč
-
Přidat k OblíbenýmSlice Engineering 300°C Thermistor
High Quality Component Capable of reading from room temperature up to 300°C. 15mm long, 3 mm diameter cartridge. A standard for sleeved thermistors. 2m long bare leads. 5mm long filler shaft.
Na objednávku (10001 ks)
819 Kč
-
Přidat k OblíbenýmSlice Engineering PT1000 RTD 500°C Temperature Sensor
Accurate from freeze-your-butt-off cold (-50 °C) to instantly-boil-your-innards hot (500 °C) Totally linear temperature response improves sensing accuracy across the range Virtually eliminates lead measurement error inherent in Pt100 sensors Highly accurate, IEC 60751 Class B tolerance (+/- 0.3 +0.005 |t| °C) 15 mm long. 3 mm diameter sensor cartridge 2 m long bare leads allow for easy...
Na objednávku (10001 ks)
819 Kč
-
Přidat k OblíbenýmSlice Engineering Mosquito 12V 50W heater
Main product features:Cartridge length: 22 mmCartridge diameter: sized to fit into a 6mm H7 tolerance holeBare leads with 1.2m in length Extension cable is 1m in length Molex connectors 50W
Na objednávku (10001 ks)
589 Kč
-
Přidat k OblíbenýmSlice Engineering RepRap M6 Vanadium Nozzle 0,3 mm - 1,75 mm - 1 pcs
Lifetime warranty against abrasion Wear resistant, plastic repellent coating Made of Vanadium HSS, hardened and tempered to 64 Rockwell C. Available in multiple orifice sizes
Na objednávku (10001 ks)
1029 Kč
-
Přidat k OblíbenýmSlice Engineering RepRap M6 Vanadium Nozzle 0,8 mm - 1,75 mm - 1 pcs
Lifetime warranty against abrasion Wear resistant, plastic repellent coating Made of Vanadium HSS, hardened and tempered to 64 Rockwell C. Available in multiple orifice sizes
Na objednávku (10001 ks)
899 Kč
-
Přidat k OblíbenýmSlice Engineering RepRap M6 BridgeMaster Nozzle 0,2 mm - 1,75 mm - 1 pcs
Optimized for thermal conduction, the BridgeMaster® Nozzle allows you to achieve peak bridging performance.
Na objednávku (10001 ks)
779 Kč
-
Přidat k OblíbenýmSlice Engineering RepRap M6 BridgeMaster Nozzle 0,3 mm - 1,75 mm - 1 pcs
Optimized for thermal conduction, the BridgeMaster® Nozzle allows you to achieve peak bridging performance.
Na objednávku (10001 ks)
779 Kč
-
Přidat k OblíbenýmSlice Engineering RepRap M6 BridgeMaster Nozzle 0,5 mm - 1,75 mm - 1 pcs
Optimized for thermal conduction, the BridgeMaster® Nozzle allows you to achieve peak bridging performance.
Na objednávku (10001 ks)
779 Kč
-
Přidat k OblíbenýmSlice Engineering RepRap M6 BridgeMaster Nozzle 0,8 mm - 1,75 mm - 1 pcs
Optimized for thermal conduction, the BridgeMaster® Nozzle allows you to achieve peak bridging performance.
Na objednávku (10001 ks)
779 Kč
-
Přidat k OblíbenýmBondtech LGX™ DD for Artillery Sidewinder X1 With Mosquito™ Magnum
This is a LGX™ Direct Drive Setup to use on Artillery Sidewinder X1, prepared to use Mosquito™ (screw mount) hotends from Slice Engineering. Hotend, fan and nozzle are included. The Mosquito fan needs a connector change that we perform on the fans ordered with this upgrade kit.
Na objednávku (10001 ks)
10499 Kč
-
Přidat k OblíbenýmBondtech HeatLink 300°C Thermistor
Plug & Play Thermistor 1.5m leads with blue sleeves and Molex micro-fit 3.0 female connector Ø 3mm Stainless Steel crimped cartridge with laser engraved Bondtech logo SeMitec 104NT-4 temperature sensor Packed in plastic bag.
Na objednávku (10001 ks)
509 Kč
-
Přidat k OblíbenýmBondtech HeatLink 24v 50W Heater
Plug & Play Heater 1.5m leads with black sleeves and Molex micro-fit 3.0 female connector Ø 6mm Stainless Steel cartridge with laser engraved Bondtech logo, SKU, electric specification and date of packaging 24v 50W heating element Packed in plastic bag.
Na objednávku (10001 ks)
429 Kč
-
Přidat k OblíbenýmBondtech HeatLink 12v 50W Heater
Plug & Play Heater 1.5m leads with black sleeves and Molex micro-fit 3.0 female connector Ø 6mm Stainless Steel cartridge with laser engraved Bondtech logo, SKU, electric specification and date of packaging 12v 50W heating element Packed in plastic bag.
Na objednávku (10001 ks)
429 Kč
-
Přidat k OblíbenýmBondtech HeatLink JST XH-2 With Lock
Plug & Play Interface Cable – JST XH-2 With Lock 50mm Interface cable with Molex micro-fit 3.0 male connector on one end JST XH-2 With Lock connector on the other Packed in plastic bag.
Dočasně vyprodáno
179 Kč