Komplety
-
Přidat k OblíbenýmNovinka v naší nabídce
E3D DiamondBack HotEnd for Bambu Lab X1E
These premium HotEnds are an official collaboration between E3D, DiamondBack, and Bambu Lab - bringing you the most extreme HotEnd solution to date. The rapid development of fibre, metal and ceramic filaments has increased the need for abrasion-resistant nozzles. Compared with all the nozzle options on the market, DiamondBacks diamonds deliver unmatched wear-resistance and...
Na objednávku (10001 ks)
5229 Kč
-
Přidat k OblíbenýmNovinka v naší nabídce
E3D High Flow HTA Complete HotEnd For Bambu Lab X1E
E3D are very proud to be the only officially approved manufacturer of aftermarket Bambu Lab HotEnds! These High Flow HTA (High Temperature Abrasive Resistant) HotEnds were developed in collaboration with Bambu Lab.HighlightsFilament diameter 1.75 mmCompatibility Bambu Lab X1EMaximum temperature 320°CDrop-in replacement HotEnd for Bambu X1E60% additional flowrate compared to the standard Bambu...
Na objednávku (10001 ks)
4219 Kč
-
Přidat k Oblíbeným
Novinka v naší nabídce
E3D DiamondBack HotEnd for Bambu Lab X1E
These premium HotEnds are an official collaboration between E3D, DiamondBack, and Bambu Lab - bringing you the most extreme HotEnd solution to date. The rapid development of fibre, metal and ceramic filaments has increased the need for abrasion-resistant nozzles. Compared with all the nozzle options on the market, DiamondBacks diamonds deliver unmatched wear-resistance and...
Na objednávku (10001 ks)
5229 Kč
-
Přidat k Oblíbeným
Novinka v naší nabídce
E3D High Flow HTA Complete HotEnd For Bambu Lab X1E
E3D are very proud to be the only officially approved manufacturer of aftermarket Bambu Lab HotEnds! These High Flow HTA (High Temperature Abrasive Resistant) HotEnds were developed in collaboration with Bambu Lab.HighlightsFilament diameter 1.75 mmCompatibility Bambu Lab X1EMaximum temperature 320°CDrop-in replacement HotEnd for Bambu X1E60% additional flowrate compared to the standard Bambu...
Na objednávku (10001 ks)
4219 Kč
-
Přidat k OblíbenýmNovinka v naší nabídce
Snapmaker All-Metal Hotend with Hardened Steel Nozzle for J1/J1s, Right (0.4 mm)
All-metal hotend for Snapmaker 3D printers
Na objednávku (10001 ks)
1159 Kč
-
Přidat k OblíbenýmNovinka v naší nabídce
Phaetus Conch Hotend Plus Bambulab P1P/P1S, 0.6mm (With Heater and Thermistor)
The Conch Hotend™ Plus for Bambu Lab P1P and P1S is a pre-assembled hotend designed for reliable performance. It offers a flow rate of up to 35 mm³/s, handles temperatures up to 320°C, and works with a wide range of filaments, including standard and composite materials.
Na objednávku (10001 ks)
1369 Kč
-
Přidat k OblíbenýmNovinka v naší nabídce
Microswiss FlowTech™ Hotend for Bambu Lab P1P/P1S - CM2™ - Hardened Tip - Standard Flow
Microswiss FlowTech™ Hotend for Bambu Lab P1P/P1S - CM2™ - Hardened Tip - Standard Flow
Na objednávku (10001 ks)
2209 Kč
-
Přidat k OblíbenýmNovinka v naší nabídce
Microswiss FlowTech™ Hotend for Bambu Lab P1P/P1S - Brass Plated CHT - High Flow
Microswiss FlowTech™ Hotend for Bambu Lab P1P/P1S - Brass Plated CHT - High Flow
Na objednávku (10001 ks)
2359 Kč
-
Přidat k OblíbenýmNovinka v naší nabídce
Microswiss FlowTech™ Hotend for Bambu Lab P1P/P1S - DiamondBack - Diamond Tip - Standard Flow
Microswiss FlowTech™ Hotend for Bambu Lab P1P/P1S - DiamondBack - Diamond Tip - Standard Flow
Na objednávku (10001 ks)
4879 Kč
-
Přidat k OblíbenýmNovinka v naší nabídce
Microswiss FlowTech™ Hotend for Bambu Lab P1P/P1S - CM2™ CHT - Hardened Tip - High Flow
Microswiss FlowTech™ Hotend for Bambu Lab P1P/P1S - CM2™ CHT - Hardened Tip - High Flow
Na objednávku (10001 ks)
2539 Kč
-
Přidat k OblíbenýmNovinka v naší nabídce
FlowTech™ Hotend for Creality Ender 3 V3 / Ender 3 V3 Plus
This kit comes with a plug and play Heater Core and thermistor, fully compatible with Ender 3 V3 printer. Stock z-height, build volume and firmware remains unchanged. Upgrading your Ender 3 V3 to a FlowTech ecosystem allows you to use a full range of FlowTech, leak-proof nozzles including Diamondback nozzles that have a solid diamond tip - NOT a diamond coating.
Na objednávku (10001 ks)
1759 Kč
-
Přidat k OblíbenýmNovinka v naší nabídce
FlowTech™ Hotend for Sovol SV08
This kit comes with a plug and play Heater Core and thermistor, fully compatible with Sovol SV08 printer. Stock z-height, build volume and firmware remains unchanged. By upgrading your Sovol SV08 to a FlowTech ecosystem, you can utilize a comprehensive range of FlowTech, leak-proof nozzles. These nozzles include the DiamondBack, CHT High Flow, and CM2 Hardened tip nozzles.
Na objednávku (10001 ks)
1759 Kč
-
Přidat k OblíbenýmNovinka v naší nabídce
Phaetus Conch Plus Hotend for Bambulab X1/P1, 0,4 mm
The Conch Hotend Plus for Bambulab X1P1 delivers high flow performance with a flow rate of up to 35mm/s. Its silicon carbide nozzle and EndCoat coating provide double wear resistance, extending the service life 7 times longer than ordinary hardened steel nozzles. This hotend is particularly suited for industrial-grade composite filaments, excelling in high-wear environments.
Na objednávku (10001 ks)
1019 Kč
-
Přidat k OblíbenýmNovinka v naší nabídce
PrimaCreator Bambulab A series Hotend H 0.2/1.75mm
PrimaCreator Bambulab A series Hotend H 0.2/1.75mm
Na objednávku (10001 ks)
409 Kč
-
Přidat k Oblíbeným
Novinka v naší nabídce
PrimaCreator Bambulab A series Hotend H 0.6/1.75mm
PrimaCreator Bambulab A series Hotend H 0.6/1.75mm
Na objednávku (10001 ks)
409 Kč